Hardness tester, Torque wrench , Torque Screwdrivers , Force Guage - OLY SCIENTIFIC EQUIPMENT -- Ultrasonic Hardness Tester MIC-200

Home > Products > Hardness Tester > Ultrasonic Hardness Tester

Ultrasonic Hardness Tester MIC-200

Request Sheet

Ultrasonic Hardness Tester MIC 200

* High Measurement Accuracy — ±3% HV, ±1.5HR, ±3%HB
* Small Indentation — Observe only by high-power microscope
* Efficient Measurement — Result In 2 Seconds
* Large LCD — Directly display measurement result, times count, Maximum, Minimal, Average and deviation
* Mass Storage — Save 2000 groups measurement data
* Simple Calibration — Save 20 groups calibration data for invoking, improve calibration efficiency
* Easy Operation — Operate well after Short training

MIC 200 Standard Delivery:

Standard Delivery	Code#
Instrument Main Body	215-101001
2Kgf manual Probe MIC202	215-101012
Protective Cap	215-101036
Probe Cable	215-101041
Accessories Box	215-101042
Instrument Manual	215-101043

MIC 200 Specifications:
Product Name	Ultrasonic Hardness Tester
Model	MIC 200
Code#	215-101001
Loading Force	1Kgf(Optional: 2Kgf, 5Kgf, 10Kgf)
Measuring Rang	HV:50～999; HRC:20～70; HB:85～650
Measuring Accuracy	HV:±3%HV; HRC:±1.5HRC; HB:±3%HB
Indenter	136°Vickers Diamond Indenter
Measuring Direction	Support 360°
Data Storage	To save 2000-group of measuring data and 20-group of calibration data
Hardness Scale	HV、HB、HRC
Data display	Loading force, testing-times, Testing result, Average, Maximum、Minimum、deviation and conversion scale.
Hardness indication	LCD display
Operating Environment	Temperature:-10℃~50℃; Humidity: 30%~80%R.H
Operating Voltage	DC 6V
Instrument Dimensions	160x80x31mm
Net Weight	Approximately 500g（Without probe）

MIC 200 Probe Specification:

Probe Type	MIC201	MIC202	MIC205	MIC210
Code	215-101011	215-101012	215-101013	215-101014
Remark	Optional	Standard	Optional	Optional
Testing force	10N	20N	50N	98N
Diamter	22mm	22mm	22mm	22mm
Length	154mm	154mm	154mm	154mm
Oscillating Rod Diameter	2.4mm	2.4mm	3mm	3mm
Roughness of measuring surface	Ra<3.2um	Ra<5um	Ra<10um	Ra<15um
Minimum thickness	2mm	2mm	2mm	2mm
Minimum Weight	0.3kg	0.3kg	0.3kg	0.3kg

Motorized Probe Specification:

Probe Type	MIC2101	MIC2103	MIC2105	MIC2108
Code	215-101016	215-101017	215-101018	215-101019
Remark	Optional	Optional	Optional	Optional
Testing force	1N	3N	5N	8N
Diamter	35mm	35mm	35mm	35mm
Length	280mm	280mm	280mm	280mm
Oscillating Rod Diameter	2.4mm	2.4mm	3mm	3mm
Minimum thickness	2mm	2mm	2mm	2mm
Minimum Weight	0.3kg	0.3kg	0.3kg	0.3kg

Support Ring Specifications:

Support Ring Name	Plan Support Ring	Small Cylinder Support Ring	Big Cylinder Support Ring
Code#	215-101033	215-101034	215-101035
Application	Plan Test Piece	Diameter 8 – 22mm Test Piece	Diameter 16 – 80 mm Test Piece

Support Ring:


Plan Support Ring 215-101033	Small Cylinder Support Ring 215-101034	Big Cylinder Support Ring 215-101035	Standard Probe Protector 215-101036	Deep Hole Probe Cap 215-101037